Common knowledge of mold engraving machine maintenance

  The mold engraving machine is a combination of drilling and milling processing from the principle of machining. The various data input modes of the engraving machine are more than necessary. Because the application range of the mold engraving machine is very wide, it is necessary to understand the most suitable application range of the mold engraving machine. Since the power is too small and greatly affects the scope of its application, the high-power engraving machine can do the things of the low-power engraving machine. It is most suitable for large-scale cutting, embossing, and engraving, but the machine also needs maintenance!
1. The continuous operation time of the mold engraving machine is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high.
2. The mold engraving machine should be cleaned every time the machine is used. It is necessary to clean the dust on the platform and the transmission system. Regularly (weekly) lubricate the transmission system (X.Y.Z three-axis).
3. If the mold engraving machine is not used for a long time, it should be refilled regularly (weekly) to ensure the flexibility of the transmission system;
4. The mold engraving machine regularly cleans the dust inside the electrical box according to the use condition, and checks whether the terminal screw is loose to ensure the safe and reliable use of the circuit;
5. The mold engraving machine periodically checks (depending on the use) whether the screws of the various parts of the machine are loose.
This way, the mold engraving machine can be maintained regularly!