Advertising word laser cutting machine perforation process characteristics?

1. Characteristics of blasting and cutting: The advantage of blasting perforation is that the perforation speed is fast, for example, a plate of 20 mm penetrates in one second. However, the disadvantage is that the hole is relatively large, and it is not suitable for the cutting of the small hole. In addition, the damage to the collecting mirror is larger, and the probability of the anti-slag to the lower surface of the collecting mirror is larger, and the perforated splashing oil must be used.

2, pulse cutting features: If it is a small hole, generally use the pulse in the perforation, the time will be a little longer, but the quality is very high. There is basically no over burning.

The cut rectangle is always jagged on one side, see if the cutting tip and the concentrator are aging or have problems. If there is no problem, then it is estimated that the problem of the light path is to see if the laser beam is in the center of the focusing mirror.

Advertising word laser cutting machine perforation process blasting perforation upward anti-slag? There are many reasons for

First, there may be slag on the cutting nozzle when the hole is blasted, resulting in uneven gas output;

Second, since the cutting nozzle is not tightened, the coaxial hole is changed when the hole is exploded;

Third, the parameter problem, the pulse-to-continuous wave after the blasting, and the time difference of the outgassing are not designed correctly;

Fourth, the blast hole is not complete. The popular saying is that the hole is cut out without punching.