Machine maintenance is like a person needs to eat. If the machine is not maintained, the life of the machine will be greatly shortened. In the woodworking engraving factory, the use of woodworking engraving machines is very frequent, so it is more important to pay attention to maintenance problems.
Woodworking engraving machine manufacturers generally give the factory a certain training to inform them about the maintenance, but many factories will not completely follow the relevant maintenance procedures, which will often lead to certain failures when the engraving machine is in use. In fact, the maintenance of the engraving machine is not very complicated, mainly consisting of two parts, one is cleaning, and the other is lubrication.
During the operation of the engraving machine, a lot of wood chips will be produced. These wood chips will be cleaned after use, but this cleaning is often only superficial, so every time, the inside of the machine needs to be cleaned together. Remove some wood chips that have been blown into the internal machinery so that the machine can be operated more flexibly.
The second is lubrication. As a kind of machinery, lubrication is like maintenance of human joints. If it is not well lubricated, the joints of the machine will rust, it will be difficult to operate flexibly, and even the whole machine will be scrapped. Lubricate should be in place carefully, and the use of better quality lubricants for lubrication, the effect will be better.
