At present, it is the sales season of engraving machine. Today, I will explain to you the common safety precautions of woodworking engraving machine for your reference. In the process of using wood engraving machine, you should pay attention to the following points:
1. After the engraving position is fixed, all X, Y, and Z axis workpiece coordinates must be classified as “0”.
2. Adjust the engraving speed and spindle motor speed to prevent the speed from being too fast and the speed to be too slow to break the knife.
3. When the tool is automatically set, pay attention to the fact that the block must be insulated from the aluminum table top of the engraving machine.
4. When engraving, if you are not sure about the first knife or are afraid of mistakes, you can slow down the feed speed and feel that the speed is normal when the engraving is normal. You can also simulate engraving in the empty range to see if it is normal.
5. If you do not use the woodworking engraving machine for a long time, you should periodically refuel every week, preferably for each week to ensure the flexibility of the transmission system.
6. The woodworking engraving machine is required to have a continuous running time of 10 hours/day or less; to ensure the cleaning of the cooling water and the normal operation of the water pump, the water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high. As much water as possible, you can change the large capacity water tank.
7. Every time the woodworking engraving machine is used, it is necessary to pay attention to cleaning. The dust on the platform and the transmission system must be cleaned up; the lubrication of the X, Y and Z axes of the transmission system should be regularly refueled.
8. It is best for the operator to wear dust masks and safety glasses when operating the wood engraving machine to avoid intrusion of dust and other dust generated during processing.
9, the woodworking engraving machine daily maintenance method should be in the woodworking engraving machine plus a certain dust and dust removal device, choose the dust removal equipment for use.
