What board can the advertising engraving machine?

The advertising engraving machine can engrave most of the non-metallic sheets, such as two-color boards, organic board (acrylic board), PVC board, wood, MDF, fire board, cardboard, aluminum-plastic board, copper-clad board, resin board, etc.

The advertising engraving machine can also engrave a small portion of thin metal sheets, such as steel sheets, alloy sheets, copper sheets, aluminum sheets, and the like.

What kind of skill can the engraving machine engrave?

1. Engraving tool selection, pay attention to the influence of the cutting edge angle and blade width on the machining accuracy and progress. If the cutting edge angle and the blade width are large, the machining speed is fast, but the machining pattern is not fine, the cutting edge angle and the blade width are Small processing speed is slow, but the graphics are fine and the durability of the tool is relatively poor.

2, the actual processing should fully consider the relationship between processing effect and processing efficiency, flexible application of thick knives, fine knives and three-dimensional carving, etc., large-area graphic area engraving using large tools for processing, small area graphics area or The effect of the small tool should be used for fine machining, and the setting of the overlap rate of the tool is also important.

3. According to the requirements of processing effect, the path generation method is selected. The two-dimensional path is suitable for plane engraving. The processing effect does not have a strong three-dimensional effect, and the processing fineness is inversely proportional to the processing depth. The three-dimensional path has a "clear angle" engraving action, the processing effect has a strong three-dimensional effect, the processing pattern is fine, the processing fineness is directly related to the fineness of the pattern and the accuracy of the tool parameters, and the processing depth only affects the three-dimensional and does not affect the fineness of the processing. The degree, the greater the processing depth, the stronger the stereoscopic effect.

4. Select the processing method according to the processing result requirements-----two-dimensional engraving, three-dimensional engraving or cutting. If pattern engraving is performed, two-dimensional or three-dimensional engraving is selected, and the generated processing path is the engraving path. If you are cutting and machining the wall surface of the sand table model, select "Cutting Word" and the generated path is the cutting path.

5. According to the fineness of processing and the texture of the material, choose the engraving processing path form----horizontal milling bottom, longitudinal milling bottom, forward 45 degree milling bottom, reverse 45 degree milling bottom. These engraving paths produce high processing precision. The processing surface is smooth. The circular path has a fast processing speed and high efficiency, but the processing effect is inferior to others.

What should I do with the engraving machine carving plate?

Friends of the advertising decoration industry often encounter such a situation, when pvc or acrylic cut text or pattern, some small strokes or small lines will be tilted after cutting, so that it will be easy to be carpentry The spindle of the engraving machine hits or is pulled to the side. This situation is more dangerous. In this case, we can make a connection to the content to be engraved.

In the rib setting dialog box, we can set the length and height of the ribs. Under normal circumstances, the value should not be too large. If it is too large, it will be difficult to get rid of the ribs. We can adjust the automatic reinforcement, just enter the number of connected ribs or the separation distance. In the above picture, a rectangular cutting path is made, and the position where the cutting path is broken is the connection of the ribs. In this way, when cutting with the CNC engraving machine, the workpiece will not be damaged or processed incorrectly due to the movement of the machining object.

What are the precautions for the engraving machine to engrave the two-color board?

When engraving a two-color board, the washed surface will have a knife ring and a knife ring.

Reasons: 1. The problem of engraving path setting; 2. The problem of the spindle speed and the feed rate of the engraving equipment is not synchronized; 3. The engraving knife tool selection error.

Solution: 1. Increase the overlap rate of the engraving path; 2. Adjust it properly to make it synchronous; 3. Select the knife correctly, but the tool must be edged correctly.