Machining center tooling tips

1, first to the X direction
   Use the tool to touch the tool on the right side of the material and creep it down, lift the tool in the Z direction, and clear the relative coordinates of the machine.
2. The tool is said to the left of the material, the tool and the material are quietly touched, and the tool is lifted. This is the X value of the relative coordinates of the machine. The tool is moved to half of the relative coordinate X, and the positive coordinate X of the machine tool is recorded. Value, and press (INPUT) input coordinate system (some systems can also be measured) Fauna system can also be measured by "measurement"
3, on the Y direction
     Use the tool to touch on the front side of the material, the tool and the material to touch quietly, lift the tool in the Z direction, and clear the relative coordinates of the machine tool.
4. The tool is said to be behind the material, the tool and the material are quietly touched, and the tool is lifted. This is the Y value of the relative coordinate of the machine tool. The tool is moved to half of the relative coordinate Y, and the Y of the machine tool is recorded. Value, and press the (INPUT) input coordinate system to control the Fauna system.

Z-direction knife approach
   Z-knife for CNC milling machine
   Move the tool to the surface of the workpiece to the Z-zero point. The tool and the surface are quietly touched. Write down the Z-direction value in the coordinate system of the machine at this time and input it into the corresponding coordinate system (such as G54). !