Use and maintenance of vehicle bearings

Core Tip: The vehicle should work within the rated load range. If the overload is overloaded, it will directly cause the bearing to overload, which will cause early failure of the bearing. More serious, it will cause vehicle failure and personal injury.
The vehicle should work within the rated load range. If the overload is severe, the bearing will be overloaded directly, which will cause early failure of the bearing, and more serious will cause vehicle failure and personal safety accidents;

The bearing is prohibited from being subjected to abnormal impact loads; {HotTag}

Regularly check the state of use of the bearing, pay attention to observe whether there is abnormal noise and partial sharp temperature rise in the bearing part;

Regular or quantitative filling of lubricating oil or grease as required;

According to the condition of the vehicle, the lubricant should be completely replaced at least every six months, and the bearings should be inspected carefully;

Inspection under bearing maintenance condition: Clean the bearing under detachment with kerosene or gasoline, carefully observe whether there is sliding or creeping of the inner and outer cylindrical surfaces of the bearing, whether the inner and outer raceway surfaces of the bearing are peeling or pitting, rolling elements and holding Whether the frame is worn or deformed, etc., based on the comprehensive condition of the bearing inspection, determine whether the bearing can continue to be used.

For more information and purchase please visit: https://www.supplyforever.com